Latest Products http://www.deluxemetal.co.in Latest Products Fri, 27 May 2022 06:06:25 +0530 en-us http://www.deluxemetal.co.in Liquid Phenol http://www.deluxemetal.co.in/liquid-phenol.htm http://www.deluxemetal.co.in/liquid-phenol.htm Mon, 12 Jul 2021 00:00:00 +0530 Used in phenol melamine resin in plywood industry. The major uses of phenol, consuming two thirds of its production, involve its conversion to precursors for plastics. Condensation with acetone gives bisphenol-A, a key precursor to polycarbonates and epoxide resins. Condensation of phenol, alkylphenols, or diphenols with formaldehyde gives phenolic resins, a famous example of which is Bakelite. Partial hydrogenation of phenol gives cyclohexanone, a precursor to nylon. Nonionic detergents are produced by alkylation of phenol to give the alkylphenols, e.g., nonylphenol, which are then subjected to ethoxylation.[7] Phenol is also a versatile precursor to a large collection of drugs, most notably aspirin but also many herbicides and pharmaceutical drugs. Phenol is also used as an oral anesthetic/analgesic in products such as Chloraseptic or other brand name and generic equivalents, commonly used to temporarily treat pharyngitis. Phenol is a component in liquid/liquid phenol–chloroform extraction technique used in molecular biology for obtaining nucleic acids from tissues or cell culture samples. Depending on the pH of the solution either DNA or RNA can be extracted. used to ward off snakes and other harmful insects and pests. Liquid Bromine http://www.deluxemetal.co.in/liquid-bromine.htm http://www.deluxemetal.co.in/liquid-bromine.htm Mon, 12 Jul 2021 00:00:00 +0530 Paint Remover http://www.deluxemetal.co.in/paint-remover.htm http://www.deluxemetal.co.in/paint-remover.htm Mon, 12 Jul 2021 00:00:00 +0530 Meproche Paint stripper: It is a formulated product and is used to remove paint from steel and other substrates Wide range of paint stripper is offered in various grades depending on the type of paint to be removed In addition, it also depends on the position of the surface i.e. vertical or horizontal   Meproche Paint Remover GP: Meproche Paint Remover GP is a general purpose paint remover It is widely used in various applications such as synthetic enamels, epoxies, stoving paints and powder paints However the exact specifications of the substrate and paint should be given for much efficient removal   Method of application: By using either brush or dip method, Meproche Paint Remover GP can be applied The surface after application should be left for five to fifteen minutes By using a scraper or a wiper cloth, the paint thereafter can be removed A second treatment can be given in case the paint surface is not removed completely due to human error of application Acetonitrile Chemical http://www.deluxemetal.co.in/acetonitrile-chemical.htm http://www.deluxemetal.co.in/acetonitrile-chemical.htm Mon, 12 Jul 2021 00:00:00 +0530 Liquid Epichlorohydrin http://www.deluxemetal.co.in/liquid-epichlorohydrin.htm http://www.deluxemetal.co.in/liquid-epichlorohydrin.htm Mon, 12 Jul 2021 00:00:00 +0530 3 5 Lutidine http://www.deluxemetal.co.in/3-5-lutidine.htm http://www.deluxemetal.co.in/3-5-lutidine.htm Mon, 12 Jul 2021 00:00:00 +0530 Tetrahydrofuran Chemical http://www.deluxemetal.co.in/tetrahydrofuran-chemical.htm http://www.deluxemetal.co.in/tetrahydrofuran-chemical.htm Mon, 12 Jul 2021 00:00:00 +0530 Dimethylformamide Chemical http://www.deluxemetal.co.in/dimethylformamide-chemical.htm http://www.deluxemetal.co.in/dimethylformamide-chemical.htm Mon, 12 Jul 2021 00:00:00 +0530 Polyamide Resin http://www.deluxemetal.co.in/polyamide-resin.htm http://www.deluxemetal.co.in/polyamide-resin.htm Mon, 12 Jul 2021 00:00:00 +0530 Beta Picoline http://www.deluxemetal.co.in/beta-picoline.htm http://www.deluxemetal.co.in/beta-picoline.htm Mon, 12 Jul 2021 00:00:00 +0530 Metal Phosphating Chemical http://www.deluxemetal.co.in/metal-phosphating-chemical.htm http://www.deluxemetal.co.in/metal-phosphating-chemical.htm Mon, 12 Jul 2021 00:00:00 +0530 We offer wide array of phosphating chemicals to our international clients. The chemical is developed under hygienic condition as per the ISO standard Prior to its dispatch at the client’s end, it is quality inspected by our professionals It is available to our clients with customized packaging.   Various phosphating chemicals offered by us are mentioned details:   Meprophos 2614 Z: It is used to produce crystalline zinc phosphate coating obtained as per class A of IS 3618 It is widely used in seven-tank process.   Step One (Degreasing): If the items to be phosphated have oily layer of grease then its degreasing should be done prior to any process   Various types of degreasing include following Alkaline Degreasing:   Following are the steps for alkaline degreasing: Dissolve Meproche 245 at a ratio of 5% in water Heat upto 80-85°C and dip the parts for 5 to 10 minutes It removes industrial soil age, oil and grease and provides dirt free parts   Test & Replenishment: Take 10 ml of bath material and titrate against 0.1 N Sulfuric acid, using phenolphthalein as indicator The pink end point should be between 60-65 ml and if found less add more Meproche 245 @ 0.8 kg per 1000 liters of bath material It gives rise in pointage (No. of ml of 0.1 N sulfuric acid) and thus maintain the pointage between 60 and 65 Remove the oil and grease from the top of the bath by skimming, as and when generated   Solution Degreasing: Use of Trichloro Ethylene or 1: 1: 1 Trichloro Ethane or Meproche Chlorosol Ultrasonic Vibration is used if the parts are small then to accelerate the degreasing greatly Meproche Chlorosol is very effective and cheaper than Tricholoro ethylene and 1:1:1 Trichloro Ethane.   Specifications: Dip time = 10 to 15 seconds Temperature = RT (or 5 to 10 minutes for DIP type degreasing at room temperature or 5 to 20 minutes at 85° c for vapor degreasing   Step Two (Rinsing): Rinse the components in hot/cold running water     Step Three (Pickling): Following are the steps to be followed in the pickling stage Acid pickling bath should contain 14 to 18% concentration of Hydrochloric acid 18% Conc. from April to September Add l litres of Meprolene per 1000 kgs of the bath material Phosphating Powder http://www.deluxemetal.co.in/phosphating-powder.htm http://www.deluxemetal.co.in/phosphating-powder.htm Mon, 12 Jul 2021 00:00:00 +0530 To present the numerous specifications of the customers, we are Manufacturer, Distributor, Supplier, Trading Company a wide collection of lMeprophos Phosphating Chemicals, in Mumbai, Maharashtra, India These are quality confirmed and are best in nature We are cent percent ensure about the product quality and functionality Patrons can avail this product from us on very nominal charges. Liquid Phosphating Chemical http://www.deluxemetal.co.in/liquid-phosphating-chemical.htm http://www.deluxemetal.co.in/liquid-phosphating-chemical.htm Mon, 12 Jul 2021 00:00:00 +0530 Our phosphating chemical is available to our clients with customized packaging We offer wide array of phosphating chemicals to our international client The chemical is developed under hygienic condition as per the ISO standard Prior to its dispatch at the client’s end, it is quality inspected by our professionals   Various phosphating chemicals offered by us are mentioned details:   Meprophos 2614 Z: It is used to produce crystalline zinc phosphate coating obtained as per class A of IS 3618. It is widely used in seven-tank process.   Step One (Degreasing): If the items to be phosphated have oily layer of grease then its degreasing should be done prior to any process   Various types of degreasing include following   Alkaline Degreasing: Following are the steps for alkaline degreasing Dissolve Meproche 245 at a ratio of 5% in water Heat upto 80-85°C and dip the parts for 5 to 10 minutes It removes industrial soil age, oil and grease and provides dirt free parts.   Test & Replenishment: Take 10 ml of bath material and titrate against 0.1 N Sulphuric acid, using phenolphthalein as indicator The pink end point should be between 60-65 ml and if found less add more Meproche 245  0.8 kg per 1000 liters of bath material It gives rise in pointage (No. of ml of 0.1 N sulphuric acid) and thus maintain the pointage between 60 and 65 Remove the oil and grease from the top of the bath by skimming, as and when generated Heat Treatment Salt http://www.deluxemetal.co.in/heat-treatment-salt.htm http://www.deluxemetal.co.in/heat-treatment-salt.htm Mon, 12 Jul 2021 00:00:00 +0530 Meproche MN 660: Working range 660° C to 890° C used as preheating salt for high speed tool steels, selective carbon steels and hot working steel prior to hardening with Meproche 970 Meproche MN 660 SPL : Working range 660° C to 930° C Does not allow the formation of oxide film on the jobs It is compatible with cynide and allows easier absorption of carbon Meproche MH 830 : Working range 830° C to 1100° C Used for hardening of corrosion resisting steels, 2% carbon, 12% chromium tool steels and steels used for cutlery Sometimes used as alternative to Meproche 970 or 1100 for hot working steels Use of regenerator is recommended Meproche MH 970 : Working range 970° C to 1350° C Used for heating the high speed and hot working steels to obtain the desired hardening temperature in the above working range This salt avoids scaling as well as decarburisation of the steels However certain types of above steels tend to decarburise during hardening in MH 970, resulting in a low surface hardness Whenever this problem encountered, MH 971 should be used to prevent any decarburisation Meproche MH 971 : Working range 970° C to 1350° C Used for hardening high speed steel and hot working steels with minimum amount of decarburisation Meproche MH 1100 : Working range 950° C to 1350° C The most superior quality salt with high purity and practically no moisture content Used with regenerator to clean the high salt bath The regenerator contains deoxidation agent which reacts and converts the oxide impurities into slag thereby preventing decarburisation Meproche 11000 is used for the heat treatment of - high speed steels Hot working steels used for dies, punches, mandrels, moulds etc. and high carbon high chromium type steels It does not allow decarburisation Heat Transfer Salt http://www.deluxemetal.co.in/heat-transfer-salt.htm http://www.deluxemetal.co.in/heat-transfer-salt.htm Mon, 12 Jul 2021 00:00:00 +0530 Neutral Salt http://www.deluxemetal.co.in/neutral-salt.htm http://www.deluxemetal.co.in/neutral-salt.htm Mon, 12 Jul 2021 00:00:00 +0530 Meproche MN 660 : Working range 660° C to 890° C used as preheating salt for high speed tool steels, selective carbon steels and hot working steel prior to hardening with MEPROCHE 970.   Meproche MN 660 SPL : Working range 660° C to 930° C. Does not allow the formation of oxide film on the jobs. It is compatible with cynide and allows easier absorption of carbon.   Meproche MH 830 : Working range 830° C to 1100° C. Used for hardening of corrosion resisting steels, 2% carbon, 12% chromium tool steels and steels used for cutlery. Sometimes used as alternative to Meproche 970 or 1100 for hot working steels. Use of regenerator is recommended.   Meproche MH 970 : Working range 970° C to 1350° C. Used for heating the high speed and hot working steels to obtain the desired hardening temperature in the above working range. This salt avoids scaling as well as decarburisation of the steels. However certain types of above steels tend to decarburise during hardening in MH 970, resulting in a low surface hardness. Whenever this problem encountered, MH 971 should be used to prevent any decarburisation.   Meproche MH 971 : Working range 970° C to 1350° C. Used for hardening high speed steel and hot working steels with minimum amount of decarburisation.   Meproche MH 1100 : Working range 950° C to 1350° C. The most superior quality salt with high purity and practically no moisture content. Used with regenerator to clean the high salt bath. The regenerator contains deoxidising agent which reacts and converts the oxide impurities into slag thereby preventing decarburisation. Meproche 11000 is used for the heat treatment of - high speed steels. Hot working steels used for dies, punches, mandrels, moulds etc. and high carbon high chromium type steels. It does not allow decarburisation. Tempering Salt http://www.deluxemetal.co.in/tempering-salt.htm http://www.deluxemetal.co.in/tempering-salt.htm Mon, 12 Jul 2021 00:00:00 +0530 Economizer Salt http://www.deluxemetal.co.in/economizer-salt.htm http://www.deluxemetal.co.in/economizer-salt.htm Mon, 12 Jul 2021 00:00:00 +0530 Rust Converter Chemical http://www.deluxemetal.co.in/rust-converter-chemical.htm http://www.deluxemetal.co.in/rust-converter-chemical.htm Mon, 12 Jul 2021 00:00:00 +0530 Our company is offering quality Meproche C-21 rust converter, that is based on polyhydroxy organic compounds It is efficiently used to remove rust from stored steel and old rusted steel already erected (whether in RCC or otherwise) With the chemical Meproche C-21 rust converter, pitted surfaces can be converted into a protective coat. It is supplied in two packs. A surface treated with Meproche C 21 accepts primers and paint fast. It increases adherence of primers and paints and thus improves the life of paints It covers approximately 70/75 square meter per Kg.   Method of application: Mix 50 gms of part A to 0.950 kg. of part B Apply on the rusted surface and leave it for 4 to 6 Hrs Remove rust by wire brush Repeat the process if necessary The chemical converts the balance rust into a passive state thus stop further rusting It provides temporary solution for rust prevention. It can later be painted or lined Rubber gloves should be used while handling Meproche rust converter as it is mildly acidic in nature   Note: The information provided is based on our experience and tests conducted by us on typical specimen However, the actual working conditions are beyond our control and knowledge Hence, we are not responsible for any liability for loss, damage, injury or mishap resulted Rust Prevention Chemical http://www.deluxemetal.co.in/rust-prevention-chemical.htm http://www.deluxemetal.co.in/rust-prevention-chemical.htm Mon, 12 Jul 2021 00:00:00 +0530 Backed by expert chemists, we are able to formulate Meproche rust preventives in conformity with international standard Wide range of the chemical is produced from quality raw material Various types of Meproche rust preventives offered by us include following   Solvent types:   Tabulated below are the solvent type meproche rust preventives, we offer:   Meproche B Solvent based Quick drying Gives waxy film of thickness 7 to 12 microns Covers 70 to 78 sq. M. Per litre Easily wipe able   Meproche 267 Strong water displacement Fingerprint neutralizer used for indoor application Coverage 97 to 105 Sq. m. per litre Gives 7 to 12 micron film thickness Dries in 1.5 min.   Oil Types:   Wide range of oil types for meproche rust preventives offered by us are tabulated below: Meproche Light Thin oily consistency Used for indoor application Gives film thickness of 25 to 40 microns Covers 85 to 95 Sq. m. per litre Non drying Meproche Medium Medium viscosity Higher film thickness of 50 to 75 microns Non drying type Covers 58 to 64 sq.m/litre.   Meproche Extra Heavy Soft paste - for anti friction bearings Covers 3 to 6 Sq. m. per kg Gives a film thickness of 0.6 to 1 mm Non drying type.   Meproche TX Thixotropified oil type Initial greasy consistency Becomes very thin by heat or agitation and again sets on withdrawing heat or agitation High film thickness 80 / 100 microns   Non drying   Following are some of other meproche rust preventives we offer:   Meproche 155: Meproche 155 is water-soluble and water thin able synthetic rust preventive It finds application to protect iron & steels from rusting within shop and for finished packing There may be dripping of oil from the components in case of oil type rust preventive It results into exposure of the top surface and edges causing its rusting where as in case of Meproche 155 there is no dripping because it dries in 20 min or so Its coverage is four times than that of oil type rust preventives. Phosphoric Acid http://www.deluxemetal.co.in/phosphoric-acid.htm http://www.deluxemetal.co.in/phosphoric-acid.htm Mon, 12 Jul 2021 00:00:00 +0530 Sulphanilamide http://www.deluxemetal.co.in/sulphanilamide.htm http://www.deluxemetal.co.in/sulphanilamide.htm Mon, 12 Jul 2021 00:00:00 +0530 Phenylhydrazine http://www.deluxemetal.co.in/phenylhydrazine.htm http://www.deluxemetal.co.in/phenylhydrazine.htm Mon, 12 Jul 2021 00:00:00 +0530 Pyridine http://www.deluxemetal.co.in/pyridine.htm http://www.deluxemetal.co.in/pyridine.htm Mon, 12 Jul 2021 00:00:00 +0530 Isonicotinic Acid http://www.deluxemetal.co.in/isonicotinic-acid.htm http://www.deluxemetal.co.in/isonicotinic-acid.htm Mon, 12 Jul 2021 00:00:00 +0530 Alpha Pinene http://www.deluxemetal.co.in/alpha-pinene.htm http://www.deluxemetal.co.in/alpha-pinene.htm Mon, 12 Jul 2021 00:00:00 +0530 Thiophenol http://www.deluxemetal.co.in/thiophenol.htm http://www.deluxemetal.co.in/thiophenol.htm Mon, 12 Jul 2021 00:00:00 +0530 Speciality Chemical http://www.deluxemetal.co.in/speciality-chemical.htm http://www.deluxemetal.co.in/speciality-chemical.htm Mon, 12 Jul 2021 00:00:00 +0530 Solvent http://www.deluxemetal.co.in/solvent.htm http://www.deluxemetal.co.in/solvent.htm Mon, 12 Jul 2021 00:00:00 +0530 Rust Chemicals http://www.deluxemetal.co.in/rust-chemicals.htm http://www.deluxemetal.co.in/rust-chemicals.htm Mon, 12 Jul 2021 00:00:00 +0530 Phosphating Chemicals http://www.deluxemetal.co.in/phosphating-chemicals.htm http://www.deluxemetal.co.in/phosphating-chemicals.htm Mon, 12 Jul 2021 00:00:00 +0530 Machining Fluids And Oils http://www.deluxemetal.co.in/machining-fluids-and-oils.htm http://www.deluxemetal.co.in/machining-fluids-and-oils.htm Mon, 12 Jul 2021 00:00:00 +0530 Heat Treatment Salts and Chemicals http://www.deluxemetal.co.in/heat-treatment-salts-and-chemicals.htm http://www.deluxemetal.co.in/heat-treatment-salts-and-chemicals.htm Mon, 12 Jul 2021 00:00:00 +0530